Decommissioning, Dismantling And Disposal Of Materials; Decommissioning; Demolition And Dismantling - M Pumps SCE Series User Manual

CAUTION
During the first assembly, or reassembly of the pump, it is recommended to apply the low
strength thread locker (AREXONS 52A22 - LOCTITE 222 or equivalent) on the locking nut
of the external magnet to prevent unscrewing problems.

DECOMMISSIONING, DISMANTLING AND DISPOSAL OF MATERIALS

Decommissioning

For an eventual long time decommissioning, it is advisable to apply some simple precautions to preserve correctly
the pump.
Make the pump run with clean water (or other suitable solvent compatible with the materials of the pump) for
several minutes, in order to avoid the risk of liquid precipitation or deposits. Disconnect from the electric power /
liquid supply and place it in a protected site
During the commissioning after a long period of stocking, carefully follow all recommendations for commissioning
described at beginning of this manual
CAUTION
A good stocking will guarantee against unpleasant incidents during the restarting of the
pump. M PUMPS PROCESS disclaims any responsibility for machines stored incorrectly. If
you intend to stop using this pump it is recommended to make it inoperative.

Demolition and dismantling

The user must comply with the legislation on environmental conservation and will have to deal with the disposal
and elimination of materials and harmful substances of the pump components. It is recommended to destroy the
identification plates of the pump and any other document.
Pag. 24/33
.
ISM0210 Instruction Manual of series SCE - Rev.03