Sony Ericsson MW600- Wireless Headset User Guide

Prior to use, please read the Important information leaflet separately provided.
This User guide is published by Sony Ericsson Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/ or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide.
All rights reserved.

The Hi-Fi Wireless Headset with FM Radio MW600 lets you stay in control of your incoming and outgoing phone calls. You can listen to the radio and enjoy gaming with PSP® system or PC. You can also enjoy stereo audio from a phone or other Bluetooth device, such as a computer or a portable music player. During calls, the music automatically pauses and starts playing again when the call ends.

Headset overview

1. Microphone
2. Call key
3. Display
4. Touch volume control
5. On/off key
6. Charger connector
7. Headphone connector
8. Clip
9. Next key
10. Play/pause key
11. Previous key

Display icons

	Battery status
	Battery charging
	The headset is on
	The headset is ready to be paired with another device
	Incoming call
	Outgoing call
	Ongoing call
	Voice activated dialling is on
	Adjusting the music volume
	Adjusting the voice volume
	Music source selection menu
	Calling device selection menu
	Music mode selection menu
	Gaming mode
	Music mode
	FM radio mode
	The microphone is muted

Charging

Before using the headset for the first time, you need to charge it with the supplied charger for 8 hours (see figure 2). The normal charging time is 2.5 hours. Use Sony Ericsson chargers only.

It is not possible to use the headset during charging.

Turning on and off

To turn on the headset

• Press and hold down until the display turns on.

To turn off the headset

• Press and hold down until the display turns off.

Pairing the headset

Pairing the headset with a phone
To use the headset with a phone, you need to pair the headset with the phone. After successful pairing, the headset connects automatically to the phone as soon as the headset is turned on and within range.

To pair the headset with a phone

1. Make sure the headset is turned off.
2. Turn on the Bluetooth function in the phone. For instructions, see the phone User guide.
3. Turn on Bluetooth visibility in the phone. This makes the phone visible to other Bluetooth devices.
4. Place the phone within 20 cm (8 inches) of the headset.
5. Press and hold down on the headset for about 5 seconds until the pairing indicator appears on the display.
6. Auto pairing in your phone: When asked to add the MW600, follow the instructions that appear.
7. Normal pairing in your phone: Search for and add a new device.
8. If a passcode is required, enter 0000.

Pairing the headset with another device
To use the headset with another device, such as a gaming device or a PC, you need to pair the headset with that device. After successful pairing, the headset connects automatically to the device as soon as the headset is turned on and within range.

To pair the headset with another device

1. Make sure the headset is turned off.
2. Turn on the Bluetooth function in the other device. For instructions, see the User guide of the other device.
3. Place the other device within 20 cm (8 inches) of the headset.
4. Press and hold down on the headset for about 5 seconds until the pairing indicator appears on the display.
5. In the other device: Search for and add a new device.
6. If a passcode is required, enter 0000.

Replacing devices
When all three paired devices are activated, you can replace one device with another.

To replace a paired device

• Use the touch volume control to select a device.

Adjusting the volume

To change the ear speaker or music volume

1. During a call, or when listening to music or the FM radio, swipe your finger along the touch volume control to enable volume control.
2. Swipe the touch volume control again to adjust the volume.

For repeated volume adjustment hold down your finger at the end of the touch volume control after a swipe.

Calling

To make a call

• Dial the number using the phone keys. The call is automatically activated in the headset.

To end a call

• Press briefly.

To make a call using voice commands

• Press briefly, wait for a beep and then say the command.

To answer a call

• A beep indicates an incoming call. Press briefly.

To reject a call

• Press and hold down until you hear a beep.

To re-dial a number

• Double-click .

To answer a second call

• Press . The ongoing call is put on hold.

To switch between two calls

• Press and hold down until you hear a beep.

To mute the microphone during a call

• Press and hold down until you hear a beep.

Calling using voice commands
Voice commands can be useful when you are using the headset. For more information on voice commands, and if your phone supports calling using voice commands, see Voice control in the phone User guide.

Transferring sound
To transfer the sound from the headset to the phone

• See Transferring sound to and from a Bluetooth handsfree in the phone User guide.

To transfer the sound from the phone to the headset

• During a call on the phone, press .

Using another device for calling
Before you can use another device for calling, the headset has to be paired with the device. The headset can be paired with up to three devices. Every time a phone is paired, this device becomes the calling device automatically.

Only one of the paired devices can be selected as a calling device at the same time.

To select a calling device

1. Press and hold down until the calling device selection menu appears.
2. Use the touch volume control to select a calling device.

Listening to music

To listen to music

1. Start the media player in your phone.
2. To start and pause the music, press on the headset.

To move between tracks

• When you listen to music, press or .

To move within a track

• Press and hold down or until you reach the desired position.

Listening to the radio

When listening to the radio, you can only change the volume from the headset.

To turn on the radio

1. Press and hold down until the audio device selection menu appears.
2. Use the touch volume control to select the FM radio. The FM radio is automatically started.

When the FM radio is the selected audio device, press to turn the FM radio on and off.

To turn off the radio

• Press .

To search for a radio station

• Press and hold down or .

To change the frequency manually

• Press or to move up or down with 100kHz.