Technical Data; Features; Scope Of Delivery; Intended Purpose And Disclaimer - I-novative Factory-Link-SPE-M User Manual

Technical Data

2

Features

2.1
• Standards: IEEE802.3bw, IEEE802.3u
• 100BASE-T1 Port (T1 Industrial Jack AH IP20, IEC 63171-6 compliant)
• 100BASE-TX Port (RJ45)
• USB-C Port (Control Center, Firmware Update, Power Supply)
• DIP Switch for manual and automatic Master/Slave setting
• Automatic Master/Slave-Detection (proprietary)
• Cable Diagnostics (T1 connection: open, short, fault distance)
• Aluminum Housing with grounding screw
◦ Dimensions: 74 x 30 x 82 mm (width x height x depth)
• Power Supply
◦ PWR Conn (3Pos Terminal Block): DC 5V – 28V
◦ USB-C: DC 5V
◦ Chassis grounding via Grounding Screw and/or SHD contact in PWR Conn
• Power Consumption: < 70mA @ 12V
• Environmental Temperature Range: -40°C - +65°C
• T1 Surge and ESD Protection
◦ IEC 61000-4-2 (ESD) 30kV (Air), 30kV (Contact)
◦ IEC 61000-4-4 (EFT) 4kV (5/50ns)
◦ IEC 61000-4-5 (Lightning) 10A (8/20µs)
• TX Surge and ESD Protection
◦ IEC 61000-4-2 (ESD) ±30 kV (Air/Contact)
◦ IEC 61000-4-5 (Lightning) 45 A (8/20 µs)
• USB ESD Protection
◦ IEC 61000-4-2 (ESD) ±15 kV (Air) / ±8 kV (Contact)
• Network Interfaces (PHYs)
◦ 100BASE-T1 PHY: Broadcom BCM89811
◦ 100BASE-TX PHY: Microchip KSZ8081

Scope of Delivery

3
• Factory-Link-SPE-M (Industrial SPE 100BASE-T1 Media Converter)
• Power Connector Receptacle (3Pos Terminal lock Plug)
• USB Cable (USB-A to USB-C)

Intended Purpose and Disclaimer

4
Disclaimer: The products sold by i-novative® GmbH are for development and testing purposes in
automotive or industrial applications only. The product Factory-Link-SPE-M is not intended to be used
in series application or series production.
Warranty Exclusion: i-novative® GmbH does not take over any liability for defects associated with the
product and installation of that product. Our product warranty does not cover problems that result from
abuse, accident, misuse, or problems with electrical power. It does not cover uses not in accordance
with the instruction manual. It does not cover commercial use of the product.
INO_Factory-Link-SPE-M_User_Manual_V1.0.docx
2022-09-10 5 / 12