Table of Contents
Advertisement
1. Intoduction
The 100BASE-T1 Media Converter easily connects 100BASE-T1 (BroadR-Reach
100BASE-TX (Fast Ethernet) networks. Using the USB interface, it supports reading and writing
of the PHY settings of both network links, diagnostic and status information, and firmware update.
Power can be supplied via the USB connector (5V) or via the main connector (6V-28V). The
power supply seamlessly switches between both sources. The 100BASE-T1 master and slave
roles can be assigned using a DIP switch. Moreover, the Media Converter features a software
controlled automatic role switch.
Warranty exclusion: his device is a development and engineering interface. For any damage of
usisng this device, no liabiltiy of the manufacturer is given. This device imay not be used in a
series product environment.
2. Technical Data
Based on:
• Broadcom BCM89811
• Microchip KSZ8081
Features:
• 100BASE-T1 Port (Molex Mini50)
• 100BASE-TX Port (RJ45)
• Mini-USB Port (Firmware Update & Host Interface)
• Link/Activity LEDs for both LAN Ports
• Master/Slave Role Selection via DIP Switch
• Automatic Master/Slave Detection (Software Controlled)
• Supply Range: 6V - 28V DC (Main Conn) / 5V (USB)
• Current Consumption: < 50mA @ 12V
• Dimensions: 77 x 75 x 29 mm
• Environmental Temperature: -40°C - +80°C
• Robust Aluminum Housing
• Suitable for in-vehicle use
) and
TM
page 3
Advertisement
Table of Contents
