Software - I-novative Factory-Link-SPE-M User Manual

Software

7
The graphical user interface is intended for remote monitoring. It can also be used for testing and
development purposes as it provides direct access to the register sets of the integrated PHYs. It
provides the following functions:
Controller
• Media Converter Selection
• Firmware Information
• Device Reset
INO_Factory-Link-SPE-M_User_Manual_V1.0.docx
2022-09-10
100BASE-T1 connection
• Link Status Monitoring
• Signal Quality Indicator (SQI)
Monitoring
• Cable Diagnostics
• Read/Write Access to PHY
registers
100BASE-TX connection
• Link Status Monitoring
• Read/Write Access to PHY
registers
9 / 12