WORKS WITH
WORKS WITH
Amazon Alexa
Google Assistant
1.Standard Accessories
Heating
Force heating
Link
Product
USB wrie
Product Overview
This set is suitable for wall-hung boiler temperature control. As
Heating
Force heating
long as you install the RF Receiver device near the wall-hung
Link
boiler, even if the
room (with an open distance of 200 meters), the RF Receiver
can be controlled by the
RF Receiver
RF Thermostat
2.Product Overview
[
RF Thermostat
]
Power supply
Temp. setting range
Operation temperature range
Measurement accuracy
Setting temp. accuracy
Transmission distance
Protection level
Wireless frequency
[ RF Receiver ]
Power supply
Device power consumption
Heating
Fore heating
Ambient temperature
Link
ransmission distance
T
Wireless frequency
3.Display Symbols
[
RF Thermostat
]
Child-lock
Frost Protection
433MHz(FSK)
)
Wi-Fi(
optional
Weather forecast
(optional)
Room Temp.
Floor Temp.
Floor Heating
Heating on
USB charge
(Type C interface)
Week Display
[ RF Receiver ]
Red light on:
heating on
Red light off:
heating off
Power light on: Power on
Power light off: Power off
Heating
Force heating
Link
RF SMART THERMOSTAT
Super strong RF signal for sub1G Communication
Powered by
Screw pack
is placed in the living room or
RF Thermostat
.
RF Thermostat
2 x 1.5 V alkaline AA batteries /
USB powered (Type C interface)
5~95℃
-5~50℃
0.1℃
0.5℃
≤200m in the open air
IP20
433MHz(FSK)/
433MHz(Bidirectional FSK)
AC100~240V;50/60Hz
1W Max
-5~50℃
200m in the open air
≤
433MHz(FSK)/
433MHz(Bidirectional FSK)
Time Display
lndoor humidity(optional)
Power key
Wake up; Event 1
Leave (am); Event 2
Return (am); Event 3
Leave (pm); Event 4
Return (pm); Event 5
Set to
Sleep; Event 6
Setting temp.
Manual Mode
Auto Mode
Temporary Mode
Battery power
Knob key
Yellow light on:
forced heating mode is on
Heating
Force heating
Yellow light off:
forced heating mode is off
Link
Flashing green: pairing
Green light on:
successful pairing
Green light off: not paired
Desktop Type RF Smart Thermostat
for wall-hung boiler
The equipment function is stable and reliable, and the
operation is simple and convenient
The device has antifreeze function, child lock function
and humidity function (only Wi-Fi model)
Knob type control temperature setting is more convenient,
flexible, and more experience
Dual mode settings, operation can be set at will, comfortable
Freedom and control of life
RF transmitter desktop design, compatible with wall-mounted
design, installation is very simple, flexible
Relying on stable RF wireless technology, the thermostat is paired
with the receiver, the signal is stable, and the pairing speed is fast
Function
T9W/N&RC9- Wi-Fi
Power on/off
Intelligence
Inside
Heating
Force heating
Link
Auto-mode
Temp. control mode
Version:1.0(01/2022)
Manual
Temp. setting
Child-lock
Time setting
Backlight Control
Pairing mode
Wi-Fi setting
Low power
reminder
Press "knob key" for 3 seconds to edit auto-mode setting.
Events
Workdays
Weekends
6.RF Thermostat advanced setting
Under power-off, press "Knod key" for 3 seconds to enter advanced setting mode, then repress
"Knob key" to switch to next mode. Press "power button" to save and exit advanced setting mode.
Code
Meaning
Temp. calibration
01
02
Temp. Dif.
03
Temp. upper limit
04
Temp. lower limit
05
Frost protection
Temperature unit
06
09
Weekly programming
setting
12
Child-lock
13
Power-on-reset
19
Reset
7.RF Receiver operating instructions
Function
Power on/off Press"
Pairing
Under power-off, press"
Distribution
network
/
is successful
Under power-off, Double click the" "
Forced output
Short press" "to exit the forced output and
return to the shutdown state
Under power-off, press" "for 3 seconds,
Reset
After the green light flashes" ",
double-click the press" " again
When powered on,
press
When the power light is flashing,
External probe
short press"
temperature
When the power light is flashing,
limit temp
short press"
setting
When the power light is flashing,
short three times press"
When the power light is flashing, Long
4.RF Thermostat operating instructions
Steps
Press "power key" shortly to turn on/off the thermostat.
Press "knob key" for 3 seconds to edit auto-mode settings.
Press "knob key" shortly to switch manual/auto mode.
Rotate "knob key" to change setting temperature by 0.5°C.
Press "knob key" + "power key" for 3 seconds to activate child-lock.
Press "power key"for 3 seconds to set time.
After plugging in the Type-C USB cable, in the power-on state,
press "power key"fastly twice to backlight control setting.
Under power-off, press "knob key" + "power key" for 3 seconds to pairing mode.
Under power-off, press "power key" for 3 seconds to Wi-Fi setting.
When the voltage is less than 2.3 V, the small icon of battery power flickers,
it is recommended to replace the new battery as soon as possible before use.
5.Auto-mode Setting
Time
Symbols
Default value
Modify
1
06:00
2
08:00
3
11:30
4
12:30
5
17:00
6
22:00
1
08:00
2
22:00
(Usually for Professional Technicians)
Knob key "
-9.9~9.9℃(-9~9℉)
0.5~10℃(1~10℉)
5~95℃(41~199℉)
5~47℃(41~117℉)
ON: frost protection on
OFF: frost protection off
℃/℉
12345: 5/2 week mode
123456: 6/1 week mode
1234567: 7/0 week mode
00: Child-lock inactivate when screen off; lock all when child-lock activate
01: Child-lock activate when screen off; lock all when child-lock activate
02: Child-lock activate when screen off; lock all except Fan Speed,
Up and Down when child-lock activate
03: Child-lock activate when screen off; lock all except Power on/off
when child-lock activate
00: Power OFF
01: Power ON
02: The last status before power loss
Press " "for 3 seconds to reset
Steps
"shortly
Power light is always on/off
" for 3 seconds " "Green flashes quickly
Buzzer beeps "
+
" "green light is on
"
The"
"
same time
"
"
"
( No temperature limit, Default value)
for 3 seconds
"
" once
green light is on(30℃ temperature limit)
"
yellow light is on(40℃ temperature limit)
" twice
"
"
red light is on(55℃ temperature limit)
Save and exit External sensor temperature
Temperature
Default value
Modify
20℃ ( 68℉ )
15℃ ( 59℉ )
15℃ ( 59℉ )
15℃ ( 59℉ )
22℃ ( 72℉ )
15℃ ( 59℉ )
20℃ ( 68℉ )
15℃ ( 59℉ )
Default value
"
-1℃
±1℃
50℃
5℃
OFF
℃
12345
00
02
/
Display state
+
"light is on
"Red light on "
+
"yellow light on
"light goes out
" lights flash once at the
"
Power light flashes
"Power light is flashing + "
"
"Power light is flashing + "
"
"Power light is flashing + "
"
Need help?
Do you have a question about the RF Smart Thermostat and is the answer not in the manual?
Questions and answers