Fujitsu ETERNUS AF250 S2 Site Planning Manual page 5

Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 (herein-
after referred to as ETERNUS AF).
The ETERNUS AF is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual describes the environmental requirements that are necessary to install and use the ETERNUS AF.
This manual is intended for use of the ETERNUS AF in regions other than Japan.
Please carefully review the information outlined in this manual.
Trademarks
Third-party trademark information related to this product is available at:
https://www.fujitsu.com/global/products/computing/storage/eternus/trademarks.html
About This Manual
Intended Audience
This manual is intended for managers of facilities where the ETERNUS AF is installed.
Related Information and Documents
The latest version of this manual and the latest information for your model are available at:
https://www.fujitsu.com/global/support/products/computing/storage/manuals-list.html
Document Conventions
■
Third-Party Product Names
Oracle Solaris may be referred to as "Solaris", "Solaris Operating System", or "Solaris OS".
•
®
•
Microsoft Windows Server
■
Notice Symbols
The following notice symbols are used in this manual:
®
may be referred to as "Windows Server".
Indicates information that you need to observe when using the ETERNUS storage system.
Make sure to read the information.
Indicates information and suggestions that supplement the descriptions included in this
manual.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
5
Preface
Sixth Edition
June 2021
P3AG-1812-06ENZ0