Disassembly Instruction - Icom IC-F4TR Service Manual
Uhf trunked radio
Hide thumbs
Also See for IC-F4TR:
- Service manual (7 pages) ,
- Adjustment procedure (4 pages) ,
- Instruction manual (2 pages)
Table of Contents
Advertisement
SECTION 3
• Removing the cassis panel
1 Unscrew 1 nut A, and remove 1 nob B.
2 Unscrew 2 screws C.
3 Take off the chassis in the direction of the arrow.
4 Unplug J6 to separate front panel and chassis.
B
Knob
A
Nut
• Removing the MAIN unit
1 Remove the sealing rubber.
2 Unsolder 3 points D, and unscrew 1 nut E.
3 Unscrew 2 screws F and 6 screws G (silver, 2 mm) to separate the chassis and MAIN unit.
4 Take off the MAIN unit in the direction of the arrow.
Sealing rubber
DISASSEMBLY INSTRUCTION
Front panel
G
(silver, 2 mm) × 6
D
E
Nut
Chassis
C
(nickel, 2 mm) × 2
J6 (Speaker connector)
Shield cover
F
(black, 2 mm) × 2
G
G
G
Chassis
3 - 1
G
G
Guide holes
MAIN unit
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-F4TR and is the answer not in the manual?
Questions and answers