Resistance Bands - Ogawa EZ Wave Lite User Manual

Name and Function of the Product
Power:Press the button with plug in,LCD shows
"00" "10" ,the machine is swith on and standby.
Auto program:"P1" "P2" "P3"
Start/Pause:Insert the power plug, switch on power,
Then press the button to start the product. In the
Operation of the machine, press this button to stop
Working.
Speed+: Speed increase: Manual 1-30. Press this
button.To increase the speed when the machine is
operating.
Time+: Time increase: the default working time is 10
Minutes, divided into 10 levels, press tis button to
Increase time.
Speed-: Speed decrease: Manual 1-30. Press this
button .To decrease the speed when the machine is
operating.
Manual quick button
Time-: Time decrease:the default working time is 10
Minutes, divided into 10 levels, press this button to
Decrease time.
Note:The effective reception range of the remote
Control signal is 2.5 meters, the infrared emission
Indicator of the controller should be aligned the
infrared Receiving window on the product.
6

Resistance Bands

To use the resistance bands as part of you work out first of all attach
the resistance bands to your ezWaze. To do this take the loop at the
end of resistance band and thread this through the foxed hoop located
on the underside of the ezWaze. There are two fixed hoops; one
located on each side underneath the ezWaze next to the handle.
Once you have pulled the loop through the fixed hoop, take the handle
of the resistance band and slide this through the loop, so that it creates
a knot around the fixed hoop. This should ensure that resistance band
is firmly locked into place and will not detach when in use. Please check
the knot is secure before you use the ezWaze and always check that
the fixed hoop and the resistance band are securely attached before
each use. Regularly check the resistance bands for any signs of wear
and do not use if they appear frayed or damaged.
7