Installation - Diono Everett NXT Instruction Manual

INSTALLATION

WARNING! Unsecured objects can become flying hazards
and can cause serious injury in an accident. Secure this
booster seat using vehicle seat belt or ISOFIX even when not
occupied. If your vehicle is equipped with lower anchors,
Diono always recommends installation utilizing the ISOFIX
connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows secure
attachment to a vehicle's lower anchor locations.
IMPORTANT: Do not use ISOFIX if installation interferes
with vehicle seat belt.
IMPORTANT: When using booster seat in center seating
position, make sure it is stable and does
not rock from side to side.
1. Rotate ISOFIX connectors away
from the seat bottom and extend
fully until you hear a "click".
2. Place the seat in the vehicle and
align the ISOFIX connectors to the
vehicle's lower anchors.
18
Everett NXT
3.
WARNING!
both connectors. If the indicator is RED, pull on the tab to
release the connector from the anchor and re-attach until
the lock button turns GREEN.
1
NOTE:
adjusted, child seat will still have movement against the
vehicle seat back and bottom.
2
Attach both ISOFIX connectors to
the vehicle anchors. The ISOFIX
lock button will change from
to GREEN when the connectors
"click" locking to the vehicle
anchors.
Ensure the LATCH lock button is
Even with ISOFIX connectors properly attached and
diono.com
INSTALLATION
RED
3
GREEN on
19