Cup Holder; Care & Maintenance - Diono Everett NXT Instruction Manual

CUP HOLDER

1. To attach your cup holder, locate
the cup holder icon on seat cover
on either side of the seat.
2. Insert the cup holder with into the
slot in the seat. Push down to
securely engage the cup holder into
the slot and twist to secure.
WARNING: DO NOT use with hot liquids
as this could burn a child.
IMPORTANT: Do not step on or put excess weight on the
cup holder which could cause it to break.
26
Everett NXT
REMOVING THE COVER
1.
CLEANING FABRICS: Seat Pad, Infant Support, Harness and Buckle Pad
2.
1
3.
Machine wash in cold
water on gentle cycle.
DO NOT
Use mild detergent
chemical or cleaning agent.
the seat.
CLEANING HARNESS: Harness and Buckle Straps
CLEANING FABRICS: Seat Pad, Infant Support, Harness and Buckle Pad
2
Spot clean only with
Machine wash in cold
warm water. Use mild
water on gentle cycle.
detergent
Use mild detergent
CLEANING PLASTICS: Seat Shell and Components
CLEANING HARNESS: Harness and Buckle Straps
Spot clean only with
Spot clean only with
warm water. Use mild
warm water. Use mild
detergent
detergent
CARE & MAINTENANCE
Separate backrest section from seat bottom section.
Remove plastic fasteners and elastics that secure fabric
cover to seat bottom, backrest and head support.
Remove fabric cover pieces from the booster seat
sections.
Dry flat and in the
shade only
use solvents, harsh detergents or any other
DO NOT
CLEANING FABRICS: Seat Cover
Dry flat and in the
Dry flat and in the
shade only, before
shade only
re-use
CLEANING PLASTICS: Seat Shell and Components.
Towel dry
Dry flat and in the
completely before
shade only, before
re-use
re-use
diono.com
DO NOT bleach,
iron or dry clean
lubricate any part of
DO NOT bleach or
DO NOT bleach,
iron
iron or dry clean
DO NOT bleach
DO NOT bleach or
iron
27