Shark HYDROVAC WD200 Series Owner's Manual

Shark HYDROVAC WD200 Series Owner's Manual

Cordless 3-in-1 cleaner
Hide thumbs Also See for HYDROVAC WD200 Series:

Advertisement

Cordless 3-in-1 Cleaner
WD200 Series
OWNER'S GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYDROVAC WD200 Series and is the answer not in the manual?

Questions and answers

Kathy Campshure
February 13, 2025

My Hydrovac is less than a year old, and I really love it! However, it recently stopped working. It displays that the cleaning solution tank is empty, but it's not. I tried reinserting the tank several times but it is not reading that the tank is full. Any tips to help me correct this?

2 comments:
Mr. Anderson
February 13, 2025

Ensure the clean solution tank is properly seated by reinserting it until it clicks into place and is flush with the top of the body. Also, confirm that the tank contains sufficient water and Shark HydroVac Multi-Surface Concentrate. If the issue persists, check for any blockages or misalignment in the tank connection.

This answer is automatically generated

Kathy Campshure
February 18, 2025

@Mr. Anderson Thanks for the response. I tried that several times. The roller becomes moist, so I know liquid is getting down to it. I **** thinking it is some kind of sensor error. :(

Subscribe to Our Youtube Channel

Summary of Contents for Shark HYDROVAC WD200 Series

  • Page 1 Cordless 3-in-1 Cleaner WD200 Series OWNER’S GUIDE...
  • Page 2: Important Safety Instructions

    265° F (130° C) as it adjustment, cleaning, maintenance or electrician. DO NOT force into outlet or may cause explosion. 12. Only use Shark® branded filters and troubleshooting. try to modify to fit. accessories. 24. During cleaning or routine maintenance, To reduce the risk of shock and 13.
  • Page 3: Li-Ion Battery

    NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of handle.
  • Page 4: Filling The Clean Solution Tank

    FILL THE CLEAN SOLUTION TANK Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface Concentrate, filling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks into place.
  • Page 5: Self-Clean Cycle

    USING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER CONTROLS SELF-CLEAN CYCLE The self-clean cycle automatically cleans the system and the brushroll. Recommended after every use POWER Press and release the Power button on the handle to turn on power. To turn off power, press the button again.
  • Page 6 MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER MANUALLY CLEANING THE BRUSHROLL CLEANING THE DIRTY WATER TANK You can clean the brushroll by hand as an alternative to the self-clean cycle, and to remove debris or hair wrapped around the brushroll. 1.
  • Page 7: Checking For Blockages

    ORDERING REFILLS AND PARTS Replace the filter and brushroll every 6 months. Only use Shark HydroVac™ Disinfectant, Shark HydroVac Concentrates, or water with the Shark HydroVac. To order brushrolls, filters, Shark HydroVac Multi-Surface Concentrate, and Shark HydroVac Disinfectant, please visit sharkclean.com or scan the QR code below.
  • Page 8 LED GLOSSARY LED GLOSSARY SCENARIO SCENARIO VISUAL VISUAL DETAILS DETAILS UNIT IS IN USE UNIT IS IN USE Single battery icon is on. Single battery icon is on. Battery low. Note - you will not be able to run a self-clean cycle. Solid.
  • Page 9 What is not covered by this warranty? What is not covered by this warranty? Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.), which require regular Normal wear and tear of the battery, which requires optimal temperature storage and operation to ensure maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this its proper functioning.
  • Page 10 NOTES REGISTER YOUR PURCHASE registeryourshark.com RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS Voltage: 21.6V Model Number: ����������������������������� Date Code: ��������������������������������� Date of Purchase: ��������������������������� (Keep receipt) Store of Purchase: ��������������������������� TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the 3-in-1 Cleaner.
  • Page 11 This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information. © 2022 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. SHARK HYDROVAC is a trademark of SharkNinja Operating LLC. RBRC is a trademark of Rechargeable Battery Recycling Corporation.

This manual is also suitable for:

Hydrovac wd201

Table of Contents