Omnitron Systems OmniConverter 10G User Manual

Multi-gigabit/multi-rate 10m, 100m, 1g, 2.5g, 5g, 10g media converters

Advertisement

Quick Links

OmniConverter
Multi-Gigabit/Multi-Rate
10M, 100M, 1G, 2.5G, 5G, 10G
Media Converters
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10G/S
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
(excluding the AC/DC power adapter) can be extended to five (5) years by registering
the product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter 10G and is the answer not in the manual?

Questions and answers

Summary of Contents for Omnitron Systems OmniConverter 10G

  • Page 1 Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.:...
  • Page 2: Product Overview

    1Gbps, 2.5Gbps, 5Gbps and 10Gbps. (c) Return equipment using collection method agreed with Omnitron. The OmniConverter 10G/S are standard Layer 2 Ethernet switches that forward frames to any port based on their MAC address. The 10G/S supports frame sizes up to 10,240 bytes.
  • Page 3 SW1: Mode Of Operation - “Normal / Directed” 1) Configure DIP-switches DIP-switches are located on the side of the module. The DIP-switches are used to This DIP-switch is only supported on models with 2 RJ-45 ports. configure modes of operation and networking features. The module supports Normal Switch and Directed Switch mode.
  • Page 4: Rack Mounting

    2) Installing the Module 3) Apply Power Wall Mounting AC Power The wall mounting height of the module should be less than or equal to 2 meters Secure the ground wire to the ground screw. See the figure below for the location (6.6 feet) from the floor.
  • Page 5 DC Power Locate the DC circuit breaker of the external power source, and switch the circuit breaker to the OFF position. This module is intended for installation in restricted access areas. (“Les matériels Prepare a power cable using a three conductor insulated wire (not supplied) with sont destinés à...
  • Page 6: Connect Cables

    4) Connect Cables 5) Verify Operation Insert the SFP/SFP+ transceiver into the SFP receptacle on the front of the Verify the module is operational by viewing the LED indicators. module. Refer to the SFP or SFP+ data sheets for supported 1G and 10G Power LED Indicators transceivers.
  • Page 7: Specifications

    Specifications Safety: UL 62368-1*, UL 60950-1*, IEC 62368-1*, OmniConverter 10G/S Description IEC 60950-1*, Multi-gigabit/multi-rate copper to 1/10G SFP Media Converter EN 62368-1*, EN 60950-1*, Standard Compliances IEEE 802.3, 802.3bz CAN/CSA C22.2 No. 62368-1-14*, Environmental RoHS, WEEE, REACH CAN/CSA C22.2 No. 60950-1*,...
  • Page 8 Mechanical Page 15 Page 16...

This manual is also suitable for:

Omniconverter 10s

Table of Contents