Omnitron Systems OmniConverter FPoE/SE User Manual

Advertisement

OmniConverter
FPoE/SE and FPoE+/SE
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in
material and workmanship for a period of two (2) years from the date of shipment.
A lifetime warranty may be obtained by the original purchaser by registering this
product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product to
Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter FPoE/SE and is the answer not in the manual?

Questions and answers

Summary of Contents for Omnitron Systems OmniConverter FPoE/SE

  • Page 1 Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.:...
  • Page 2: Installation Procedure

    Product Overview Directive) of the European Community directive 2012/19/EU on waste electrical and The OmniConverter FPoE/SE and FPoE+/SE are cost-effective, multi-port media electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ converters that convert 10/100/1000BASE-T copper to 100BASE-X fiber and support EU, for electrical and electronic equipment sold in the EU after July 2019.
  • Page 3 1) Installing the Module DC Power Wall Mounting This module is intended for installation in restricted access areas. (“Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT”). The wall mounting height of the module should be less than or equal to 2 meters A restricted access area can be accessed only through the use of a special key, or (6.6 feet) from the floor.
  • Page 4: Connect Cables

    Locate the DC circuit breaker of the external power source, and switch the circuit VERIFY OPERATION breaker to the OFF position. Once the module has been installed and configured per steps 1 - 3, verify the module Prepare a power cable using a three conductor insulated wire (not supplied) with is operational by viewing the LED indicators.
  • Page 5: Specifications

    SPECIFICATIONS OmniConverter FPoE+/SE Description 10/100BASE-T to 100BASE-X OmniConverter FPoE/SE Fiber Media Converter with PoE+ Description 10/100BASE-T to 100BASE-X IEEE 802.3, Fiber Media Converter with PoE Standard Compliances IEEE 802.3af (15.40 watts max) and IEEE 802.3at (30 watts max) IEEE 802.3,...

This manual is also suitable for:

Omniconverter fpoe+/se

Table of Contents