Advertisement

Quick Links

OmniConverter
FPoE/SL
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in
material and workmanship for a period of two (2) years from the date of shipment.
A lifetime warranty may be obtained by the original purchaser by registering this
product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product to
Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading

Summary of Contents for Omnitron Systems OmniConverter FPoE/SL

  • Page 1 Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.:...
  • Page 2: Environmental Notices

    Product Overview Directive) of the European Community directive 2012/19/EU on waste electrical and The OmniConverter FPoE/SL media converters with multi-port options provide electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ 10/100BASE-T copper to 100BASE-FX fiber conversion and function as Power- EU, for electrical and electronic equipment sold in the EU after July 2019.
  • Page 3 SW3, SW4 and SW5 RJ-45 Configuration DIP-Switches RJ-45 RJ-45 RJ-45 RJ-45 Mode of Operation AN/MAN 100/10 FDX/HDX The RJ-45 port is set to auto-negotiation with the following modes advertised: 100FDX, 100HDX, 10FDX, 10HDX The RJ-45 port is set to auto-negotiation with the following modes advertised: 100HDX, 10FDX, 10HDX The RJ-45 port is set to auto-negotiation with the following modes advertised: 10FDX, 10HDX...
  • Page 4 SW9, SW10 and SW11 - Power Sourcing Modes PoE Modes RJ-45 Pinout The RJ-45 ports can be configured to support different powering modes. The Alternative A Alternative B powering modes include Alternative A (supporting power on pins 1,2 and 3,6), Vport Positive Alternative B (supporting power on pins 4,5 and 7,8) and legacy Power Devices Vport Positive...
  • Page 5 2) Installing the Module SW12 SW13 Function Wall Mounting DOWN DOWN Link Segment (LS) Asymmetrical Link Propagate Port 1 to Port 2 (1+1 - 2 Port models), The wall mounting height of the module should be less than or equal to 2 meters Port 1 to Port 2 and Port 3 (1+2 - 3 Port models), DOWN (6.6 feet) from the floor.
  • Page 6 WARNING: Only a DC power source that complies with safety extra low voltage (SELV) requirements can be connected to the DC-input power supply. WARNING REGARDING EARTHING GROUND: This equipment shall be connected to the DC supply system earthing electrode conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing electrode is connected.
  • Page 7: Connect Cables

    5) Verify Operation Verify the Module is operational by viewing the LED indicators. Power LED Indicators Legend Indicator Description Unit not powered Green - ON Unit powered Amber - ON Over temperature condition Power LED Indicators Fiber Port LED Indicators Legend Indicator Description...
  • Page 8: Specifications

    Specifications RJ-45 Port Indicators Legend Indicator Description OmniConverter FPoE/SL No link Description 10/100BASE-T to 100BASE-X Fiber Media Converter with PoE Green - ON Port linked at 10Mbps IEEE 802.3, Green - Blinking at 10Hz Port data activity at 10Mbps Standard Compliances IEEE 802.3af (15.40 watts)
  • Page 9: Appendix A: Link Modes

    Appendix A: Link Modes Safety: UL 62368-1*, UL 60950-1, IEC 62368-1*, IEC 60950-1, EN 62368-1*, EN 60950-1, Regulatory Compliances CAN/CSA C22.2 No. 62368-1-14*, (*Pending) CAN/CSA C22.2 No. 60950-1, CE Mark EMC: EN 55032/EN 55024 CE Emissions/Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A IP Rating: IP20 Protection Page 17...
  • Page 10 Page intentionally left blank Page 19 Page 20...

Table of Contents