Starting A Diesel Engine - Ford Fiesta 2010 Owner's Manual

2. Fully depress the accelerator pedal
and hold it there.
3. Start the engine.
Vehicles with automatic
transmission
1. Select park or neutral.
2. Fully depress the accelerator pedal
and hold it there.
3. Fully depress the brake pedal.
4. Start the engine.
All vehicles
If the engine does not start, repeat the
Cold or hot engine procedure.
Engine idle speed after starting
The speed at which the engine idles
immediately after starting will vary
depending on the engine temperature.
If the engine is cold then the idle speed
will automatically be increased in order to
heat the catalytic converter as quickly as
possible. This ensures that vehicle
emissions are kept to an absolute
minimum.
The idle speed will slowly decrease to the
normal level as the catalytic converter
warms up.

STARTING A DIESEL ENGINE

(G558264)
Cold or hot engine
All vehicles
Note: When the temperature is below
-15ºC (5ºF), you may need to crank the
engine for up to 25 seconds. If you
consistently operate the vehicle in such
temperatures, we recommend that you
have an engine block heater fitted.
Starting the engine
80
(G558264)
Note: Continue cranking the engine until
it starts.
Note: You can only operate the starter
for a maximum of 30 seconds at a time.
Switch the ignition on and wait
until the glow plug indicator
goes off.
Vehicles with manual transmission
Note: Do not touch the accelerator
pedal.
1. Fully depress the clutch pedal.
2. Start the engine.
Vehicles with automatic
transmission
1. Select park or neutral.
2. Fully depress the brake pedal.
3. Start the engine.