Technical Specifications - Ford Fiesta 2010 Owner's Manual

Note: The brake and the clutch systems
are supplied from the same reservoir.

TECHNICAL SPECIFICATIONS

Vehicle fluids
Item
Engine oil
Coolant
Brake fluid
*
You can use an alternative SAE 5W-30 engine oil, providing it meets the specification
defined by WSS-M2C913-B
Note: If you operate your vehicle in temperatures below -20°C (-4°F), you must not
use SAE 10W-40 engine oil.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-B, you must use SAE 5W-30 (preferred), SAE 5W-40 or SAE
10W-40 that meets the specification defined by either ACEA A1/B1 (preferred) or
ACEA A3/B3. Using these oils can result in longer engine cranking periods, reduced
engine performance, reduced fuel economy and increased emission levels.
Capacities
Variant
All
Vehicles with a petrol
engine
Vehicles with a diesel
engine
Vehicles with a petrol
engine
Vehicles with a diesel
engine
Maintenance
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 115).
(G1274270)
Recommended fluid
Ford or Motorcraft
Formula E SAE 5W-30
*
Engine Oil
Motorcraft SuperPlus Anti-
freeze
Ford or Motorcraft Super
DOT 4 Brake Fluid
Item
Windscreen and rear
window washer system
Engine cooling system
Engine cooling system
Fuel tank
Fuel tank
115
(G1274270)
Specification
WSS-M2C913-B
WSS-M97B44-D
WSS-M6C65-A2
Capacity in litres (gallons)
2.5 (0.6)
approx. 5.5 (1.2)
approx. 6.1 (1.3)
42 (9.2)
40 (8.8)