Appendices; Type Approvals; (G953314); Electromagnetic Compatibility (G953313) - Ford Fiesta 2010 Owner's Manual

Hide thumbs Also See for Fiesta 2010:
Table of Contents

Advertisement

TYPE APPROVALS

FCC/INDUSTRY CANADA
NOTICE
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
FCC ID: WJLRX-42
IC: 7847A-RX42
Changes or modifications to your device
not expressly approved by the party
responsible for compliance can void the
user's authority to operate the equipment.
RX-42 - declaration of
conformity
We, the party responsible for compliance,
declare under our sole responsibility that
the Handset Integration product RX-42 is
in conformity with the provisions of the
following Council Directive: 1999/5/EC. A
copy of the Declaration of Conformity can
be found at:
www.novero.com/declaration_of_conformity

Appendices

The Bluetooth word mark and logos are

(G953314)

owned by the Bluetooth SIG, Inc. and any
use of such marks by Ford Motor
Company is under license. Other
trademarks and trade names are those
of their respective owners.
ELECTROMAGNETIC
COMPATIBILITY
(72/245/EEC, UN ECE Regulation 10 or
other applicable local requirements). It is
your responsibility to ensure that any
equipment you have fitted complies with
applicable local legislations. Have any
equipment fitted by properly trained
technicians.
only be fitted to your vehicle if they comply
with the parameters shown in the table
below. There are no special provisions or
conditions for installations or use.
of the airbag system.
178
(G953314)
(G953313)
WARNINGS
Your vehicle has been tested and
certified to legislations relating to
electromagnetic compatibility
Radio frequency (RF) transmitter
equipment (e.g. cellular telephones,
amateur radio transmitters etc.) may
Do not mount any transceiver,
microphones, speakers, or any
other item in the deployment path
Do not fasten antenna cables to
original vehicle wiring, fuel pipes and
brake pipes.
Keep antenna and power cables at
least 100mm from any electronic
modules and airbags.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents