Adjusting The Windscreen Washer Jets; Checking The Wiper Blades - Ford Fiesta 2010 Owner's Manual

Pull the lever towards the steering wheel.
Reverse gear wipe
The rear wiper will be activated
automatically when selecting reverse gear
if:
• the rear wiper is not already switched
on,
• the wiper lever is in position A, B, C
or D and
• the front wiper is operating (when set
to position B).
The rear wiper will follow the front wiper
interval (at intermittent or normal speed).
Rear window washer
E102053
WARNING
Do not operate the washer for more
than 10 seconds at a time, and
never when the reservoir is empty.
While the lever is pulled towards the
steering wheel the washer will work in
conjunction with the wipers.
Once the wash and wipe cycle is
completed, the wipers will pause and then
perform one more wipe to clear the
windscreen.
Wipers and washers
36
(G837703)
After releasing the lever, the wipers
operate for a short time.
ADJUSTING THE
WINDSCREEN WASHER
JETS
(G837703)
E73425
The eye ball jets can be adjusted precisely
using a pin.
CHECKING THE WIPER
BLADES
(G839933)
E66644