Ford F Series Manual page 106

Working with the engine off
1. Set the parking brake and ensure the gearshift is securely latched in
R (manual transmission).
2. Turn off the engine and remove the key.
3. Block the wheels to prevent the vehicle from moving unexpectedly.
Working with the engine on
1. Set the parking brake and ensure the gearshift is securely latched in
N (manual transmission).
2. Block the wheels to prevent the vehicle from moving unexpectedly.
Do not start your engine with the air cleaner removed and do not
remove it while the engine is running.
Improper or incomplete servicing may result in operating
problems. This section gives instructions only for those relatively
easy items that an owner may wish to perform.
When it comes to the operations which are essential for the reliability and
roadworthiness of your vehicle, keep to the service intervals shown in this
manual. We recommend that you always take your vehicle to an
Authorised Ford Dealer for its service requirements.
Things that you must do
Check and top up fluid levels regularly. Check the tyre pressures and the
correct operation of brakes and lights. Check the warning lights. Refer to
the Maintenance chart.
If any of the underbonnet fluid levels drop significantly or require topping
up frequently, have the system inspected by an Authorised Ford Dealer.
The fluid reservoirs for engine coolant, brake and windscreen washer
fluids are translucent to allow rapid visual checks.
Keep oils, greases and vehicle fluids (including used engine oil) away
from the skin and eyes. Follow the instructions on the container if contact
occurs.
The ignition must be switched off before working in the engine
compartment. Even with the ignition switched off the cooling fan can start
automatically. Therefore take care to avoid the danger of clothing such as
ties or scarves becoming caught in the fan or drive belts.
Maintenance and care
111