Q&A; Trouble Shooting - Panasonic NI-S530 Operating Instructions Manual

Anti-drip system (automatic water seal)
This model has an anti-drip system. When the temperature
of the soleplate's surface drops to low, the valve for the
vaporizing chamber in the iron automatically closes and stops
the water from flowing. This prevents hot unvaporized water
from spewing out from the soleplate when the iron has cooled
down.With this system, it is unnecessary for you to wait until
the inside of the vaporizing chamber dries completely when
you store the iron.
Note:
• It is not a sign of malfunction even a click sound is heard.
This sound can be heard whenever this system is activated.
16
NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb 10 NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb 10
How to care for your iron
►Surface of the iron
• After unplugging and cooling the iron, simply wipe off with a
damp cloth and if necessary, use a mild detergent.
• Never use any strong cleaners.
►Soleplate
• Starch and other residue may be easily removed from the
soleplate with a damp cloth.
• To avoid scratching the surface, never use a metallic pad to
clean the soleplate, and never place the iron on a rough
surface.
• The best way to remove synthetic residue from the
soleplate is to iron over an old cotton cloth rag after heating
the iron.
Note:
Never use cleaners in the iron, since they may damage the
working parts of the iron. Some odor may be released
during initial use of the iron, however, this is normal and the
odor will not attach to your clothes. Never use steam iron
detergent in the iron, since they may damage the working
parts of the iron.
Q&A
Question Answer
These sounds are made by
Why click sound or
the internal parts of the iron,
metallic sound be heard
► spray mechanism, leakage
while using or shaking
prevention, etc., moving
the iron?
slightly. This is normal.
If there is laundry detergent
Why do the clothes
remaining on the fabric, the
sometimes become ►
clothes may become brown
brown after being ironed?
after being ironed.
Why are there white The powder/particles are
powder/particles coming hydrophilic treatment or
out of the steam vents impurities and minerals
►
while using the steam found in hard water etc.
function (especially when These are not harmful and
using " power shot ")? can be brushed off clothing.

Trouble shooting

Problem Causes, Solution
No Make sure the power plug is plugged into
►
heating socket-outlet.
Fill the water reservoir with tap water up to
►
" MAX " dot.
If there is no steam, set the steam/dry selector
No
► to the steam position, or set the temperature
steam
selector to " MAX ".
For poor steam, move the steam/dry selector
►
several times, then reset to the steam position.
Poor
Press the power shot button several times
►
steaming
when the " power shot " appears insufficient.
power
Wait until the thermostat operating indicator
►
light goes off before using the iron.
► Set the temperature selector to " MAX ".
► Push the spray mist trigger several times.
No spray
Fill the water reservoir with tap water up to
►
" MAX " dot.
Water
Press the power shot button in intervals of at
►
leaks
least 2 seconds when using the " power shot ".
from
steam Wait until the thermostat operating indicator
►
vents light goes off before using the iron.
Clothes Empty the water reservoir and fill it with clean
are ► water. There may be contaminants in the
marked iron/cup.
2022/4/29 11:05:04 2022/4/29 11:05:04
17