Important Safety Instructions - Panasonic NI-L70SR Operating Instructions Manual

SAFE USE OF THE IRON
Your safety and the safety of others is very important
We have provided important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol. It is used to alert you to potential hazards
that can kill or injure you and others. The safety messages will follow the
safety alert symbol and either the word " WARNING " or " CAUTION ".
These words mean:
You can be killed or seriously
A WAR N | N G injured if you don't follow these
instructions.
You can be exposed to a potentially
hazardous situation which, if not
A UTI N avoided, may result in minor or
moderate injury.
The safety messages will tell you what the potential hazard is, how to reduce
the chance of injury, and what can happen if the instructions are not followed.
Thank you for purchasing a Panasonic Iron
Your Iron is an appliance to be used only for ironing fabrics on an ironing board.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of burns, electric
shock, fire, or injury during the usage
W AR N | N G of this iron, basic safety precautions
should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING THE IRON
. Use the iron only for its intended purpose, for ironing fabrics on board.
To protect against burns or injury to persons, do not iron or steam fabrics while
being worn on the body.
. To protect against the risk of electric shock, do not immerse the iron or cord in
water or other liquids.
The iron should always be turned to * OFF " before plugging or unplugging AC
Power Cord from outlet. Never yank Cord to disconnect from outlet; instead,
grasp Plug and pull to disconnect.
Do not allow Cord to touch hot surfaces. Let iron cool completely before putting
away. Bundle up AC Power Cord band when storing.
Always disconnect AC Power Cord from electrical outlet when filling iron with
water and when not in use. Be careful to avoid spilling water over iron when filling.
Do not operate iron with a damaged Cord or if the iron or Power Base has been
dropped or damaged. To avoid a risk of electric shock, do not disassemble the iron
or Power Base, take it to an authorized service depot for examination and repair.
Incorrect reassembly can cause a risk of electric shock when the iron is used.
-2-
o NV
oe o
œ