Advertisement
L
cord slowly to reduce the risk of the cord "WHIPPIN
causing injury to the face, eyes. etc.
Never allow children to play with the iron or the retractable power cord. Retract cord
into cord reel unit when storring.
9. Should stop using and pull out the Plug immediately while abnormal occurs (such as
scorch, smoke etc.) to avoid fire or electric shock, then contact with our service agent.
10. If the iron was damaged or has been dropped and there are visible signs of damage or
if itis leaking. Do not repair the iron by yourself, it should be repaired by the designated
service center ; otherwise the user should take all responsibilities of damage.
11. The iron must be used and rested on a stable surface. When placing the iron on its
Power Base, ensure that the surface under the Power Base is stable.
12. Do not use the appliance with the Cord in tangled condition. The supply Cord might
be damaged soon.
AWARNING
Don't touch the high temperature parts
Don't touch the hot steam
(such as Soleplate surface,Heat-insulated
with your hands or other
plate, underside of the Water Tank)
parts of your body,
Which has the potential risk of `
(ANTI CALCIUM FUNCTION
@ The built-in Anti Calcium Cassette in the Water Tank, soften water;
continuously reduces mineral contain in the water. Reduces
scale buildup in the vaporizing chamber of the iron, makes
it possible to use steam function for a long period of time.
@ Ordinary water can be used in this iron for a long time,
and steam function doesn't weaken.
Anti Caliom Cassetto
AUTOMATIC SHUT-OFF
Wmi aonana snus"
® The iron will automatically shut itself off if the iron has been
left on the Power Base more than about 10 minutes.
@ Turn iron back on
* To tum the iron back on to resume ironing,
simply push the Temperature Selected Button
until the red light appears at the desired
Temperature Indicator.
* At the situation of Auto Shut-Off, if the supply
power shut off, after electricity resume, the iron
will at the situation of shut off.
AUTOMATIC WATER SEAL
(May be scalded.)
Don't touch.
(May be scalded.)
Please set the iron back to Power Base | Don't slant or shake the iron
while you don't iron clothes, after use a | too much.
period of time, please put the iron back
to Power Base to reheat(refer to P13
point)
(
J
(To avoid scratch on the surface
or hurt by the dropped iron.)
(May be scalded by hot water.)
Prohibit such accident occurring.
0
Operating accord with the drawing.
To reduce the risk of electric
WARNING
'ocorre:
Do not operate another high wattage appliance in the same circuit, to avoid a circuit overload.
A
T |
N
To reduce the risk of personal
injury and damage to your iron:
1, Never use steam iron cleaning products in the iron, as they may damage working parts of
the iron.
2. Do not use water additives or substitute water such as linen or scented water in the steam
iron. They can stain fabrics.
3. If the Steam/Dry Selector is not at Dry( 关 ) position after using, remaining water will move
into the Soleplate and can result in burns at the next use of the iron.
Auto-Valve System built-in the Soleplate, when the temperature of the
Soleplate drops below 110°C, The valve for the vaporizing chamber
in the iron automatically close and stops the water from going in
further. This prevents water from spitting out the Soleplate,
staining the clothes,
Besides it is unnecessary for you to heat the Soleplate again
and it will automatically dry, store the iron when it cooled.
'Auto-Valve System
HOW TO RETRACT POWER CORD
The automatically retracted cord device built-in the Power
Base, power cord can be retracted automatically.
When after ironing, hold the plug and pull the cord
out about 5-10 cm, let the cord rewind itself; then
power cord can be retracted totally.
Notice: When retracting power cord, always grasp
the plug as this may cause the cord to
"whipping " and cause injury. If the power
cord seems hard to rewind pull it out slightly
and wind it again while guiding it into Power
Ke
Base.
Atle
-12-
Advertisement
