Makita LM001G Instruction Manual page 21

6. Store the grass basket as shown in the figure.
Fig.43
► 1. Grass basket
Fig.44
► 1. Grass basket
Removing or installing the mower
blade
WARNING:
The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING:
Always remove all the battery
cartridges when removing or installing the blade.
Failure to remove all the battery cartridges may
cause a serious injury.
WARNING:
Always wear gloves when han-
dling the blade.
1
1
Removing the mower blade
For models equipped with straight mower
blade
1. Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2. To lock the blade, insert the pin into the hole on
the mower body as far as it will go.
3. Turn the bolt counterclockwise with box wrench
17.
3
Fig.45
► 1. Mower blade 2. Pin 3. Box wrench
4. Remove the bolt, and then mower blade.
1
2
3
Fig.46
► 1. Blade support 2. Mower blade 3. Bolt
4. Protrusion
NOTICE:
When installing the mower blade, make
sure that the protrusions on the blade support fit
in the holes in the mower blade.
21 ENGLISH
2
1
4