Table of Contents
Advertisement
1. Safety precautions
1.1. General safety precautions
Read this manual carefully. It contains important instructions that must be followed during installation,
operation and maintenance.
Save these instructions for future reference on operation and maintenance.
1.2. High voltage safety warnings
Voltages above 50Vdc up to 120Vdc (ELV) are dangerous and will cause serious injury, death or equipment
damage. Use appropriate personal protection equipment. De-energize the system before maintenance and
use appropriate insulated tools.
Voltages above 120Vdc (LV) are very dangerous and will cause serious injury, death or equipment damage.
Use appropriate personal protection equipment. De-energize before maintenance and use appropriate
insulated tools.
1.3. Battery safety warnings
Working in the vicinity of a lead acid battery is dangerous. Batteries can generate explosive gases during
operation. Never smoke or allow a spark or flame in the vicinity of a battery. Provide sufficient ventilation
around the battery.
Wear eye and clothing protection. Avoid touching eyes while working near batteries. Wash your hands when
done.
If battery acid contacts skin or clothing, wash them immediately with soap and water. If acid enters an
eye, immediately flood the eye with running cold water for at least 15 minutes and get medical attention
immediately.
Be careful when using metal tools in the vicinity of batteries. Dropping a metal tool onto a battery might cause
a short circuit and possibly an explosion.
Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a battery.
A battery can produce a short circuit current high enough to melt objects such as rings, causing severe burns.
1.4. Transport and storage
Store this product in a dry environment.
Store this product in temperatures between -40°C and +60°C.
Page 1
Manual - BMV-710H Smart
Safety precautions
Advertisement
Table of Contents
