Maintenance And Service; To Replace Lenses; Cleaning - Magmaweld MKM 620S User Manual

MKM 620S / KAMA

MAINTENANCE AND SERVICE

3.1 To Replace the Solarmatik Cartridge
• As shown in Figure 6a, unlock the cartridge by opening the holder lock. Disconnect the potentiometer
connection and remove the faulty cartridge. First put the new cartridge into its slot by making the
potentiometer connection. Lock the retainer lock.

3.2 To Replace Lenses

• Inner Lens: As seen in Figure 6a, the holder lock is opened and the inner lens is removed by scrolling down.
Likewise, it is replaced with a new one.
• Outer Lens: As seen in Figure 6b, the holder is opened and the cartridge is removed. With the help of two
fingers, the outer lens is pushed out. The new lens holder is placed by bending the nails. By holding the
solarmatic cartridge back into place, the holder lock is locked.

3.3 Cleaning

• Wipe the mask with a soft cloth. Clean the cartridge surface regularly. Do not use strong solvents for cleaning.
Figure 6a
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Maintenance and Service
Figure 6b
9
EN