FLARM PowerFLARM Core Installation Manual page 26

Switch system ON with BF display knob pressed.
Verify BF display goes into UPDATE MODE with 'WAITING',
•
then 'LOADING'.
•
Wait until BF display restarts (can take up to two minutes).
Multiple displays on separate Data Ports need to be updated se-
•
quentially: Press the BF display knob only on one display, then re-
peat the procedure for the other display.
Note: This procedure is only supported for displays directly con-
nected to PowerFLARM, i.e. not via a 3
For Y adapters and repeaters, please consult the display and respec-
tive 3 party documentation.
rd
PowerFLARM Core Manual v.150 International
party repeater or Y adapter.
rd
26