PiezoDrive PDUS210 Manual And Specifications page 22

17.5 Load Voltage and Current Plots
Current (A) – Load current, measured at 3.4 MSPS, 500 samples are displayed.
Voltage (V) – Load voltage, measured at 3.4 MSPS, 500 samples are displayed.
To scale an axis, hover over the axis and use the mouse wheel
• Scale both the current and voltage waveforms by hovering over the plotted signals
To auto-scale an axis, double click the axis.
• Auto-scale both the current and voltage by doubling clicking in the plot window.
17.6 Frequency and Phase Graph
Phase (deg) – Phase of the load impedance (in degrees), measured at 50 SPS for 40 seconds
Frequency (kHz) – Operating frequency (in kHz), measured at 50 SPS for 40 seconds
• To scale an axis, hover over the axis and use the mouse wheel
• To auto-scale an axis, double click the axis.
• The phase and frequency axis can be panned by left-click and dragging
PDUS210 V5 Manual 22 Modified 17/12/2022