Computherm Q1RX Operating Instructions Manual page 3

1. GENERAL DESCRIPTION OF THE SOCKET
The COMPUTHERM Q1RX socket has been developed for
thermostats COMPUTHERM Q3RF, Q5RF, Q7RF and Q8RF,
and can be used in addition to/instead of their receiver units. The
device is able to control boilers or any other electrical devices
operating on 230 V (e.g. fan heaters, pumps, zone valves, etc.).
Easy installation and operation, no assembly required. In response
to the ON command of COMPUTHERM Q3RF, Q5RF, Q7RF and
Q8RF wireless thermostats, a supply voltage of 230 V appears
on the output socket of device Q1RX connected to the network,
while the OFF command disconnects the device from the network.
If more than one COMPUTHERM thermostat has been paired to
the Q1RX socket, 230 V will be displayed on the output if any
3