Advertisement
Available languages
Available languages
No change in measurements if connected
with drain illustrated. (K-7161-AF)
2"
41-3/4" (106 cm)
(5.1 cm)
Product Information
Applicable product:
Drop-in bath whirlpool - custom pump locations
Drop-in bath whirlpool - custom pump locations
Drop-in bath whirlpool - custom pump locations
Fixture*:
Bathing well:
Basin area,
46" (116.8 cm) x 30" (76.2 cm)
bottom
Basin area, top 57" (144 .8 cm) x 34" (86.4 cm)
Weight
130 lbs (59 kg)
To overflow:
Water depth
16" (40.6 cm)
Capacity
95 gal (359.6 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
Pump
Heater
1.5 kW
Required accessories:
Jet trim kit
1043844-1-C
K-1158-HE Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
K-1158-HB
K-1158-HE
K-1158-HJ
1043292-7
V
Hz
A
220-240
50/60
11
K-9698
K-1158-HJ Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
10" (25.4 cm)
Max
10" (25.4 cm) Max
22"
(55.9 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Notes
Install this product according to the installation guide.
The pump must be relocated to its custom position at the time of
installation. Provide adequate clearance.
Floor support under whirlpool must provide for a minimum of 48
lbs/square foot (233.6 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath whirlpool is designed for drop-in installation only. It is
not suited for use in a three-wall alcove with an overhead shower.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
9" (22.9 cm)
10" (25.4 cm) Max
K-1158-HB Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
65-7/8" (167.3 cm)
1" (2.5 cm)
2-7/8"
(7.3 cm)
220-240 V, 20 A, 50/60 Hz
2-1/4"
(5.7 cm)
20-7/8"
(53 cm)
2-3/4"
(7 cm)
1-1/2" OD
Kohler Co.
Advertisement
