BIOS Setup
Integrated Peripherals
Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
USB Controller
This setting is used to enable/disable the onboard USB controllers.
USB 1.1 Device Legacy Support
Set to All Device if your need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS and SCO Unix. Set to No Mice only if you want to use any USB device
other than the USB mouse. Setting options: Disabled, No Mice, All Device.
Onboard LAN
This setting is used to enable/disable the onboard LAN. Setting options:
Disabled, Enabled.
AC'97 Audio
Auto allows the motherboard's BIOS to detect whether you're using any audio
device. If so, the onboard audio controller will be enabled. If not, the onboard
audio controller will be disabled. If you want to use different controller cards
to connect audio connectors, set the field to Disabled. Setting options:
Disabled, Auto.
3-23