Advertisement
STEP 3
Attaching your
air tubing
Follow step-by-step instructions on the
myAir app or follow the steps below:
Find your air tubing in the pocket of
A
your AirSense 11 travel bag.
Connect your air tubing by holding
B
the cuff and lining it up with
the connector port on the back
of the machine.
Line up the connector
C
pin on the tubing cuff to the
corresponding slot on the
connector port.
Push until the cuff clicks into place.
D
6
ResMed equipment start guide
A
B
C
Note: The air tubing included
with your machine might not
include the connector port
shown in images B and C.
If that's the case, simply
connect the air tubing firmly
to the air outlet on the back
of the machine.
STEP 4
Preparing your
HumidAir 11
humidifier tub*
Follow step-by-step instructions on the
myAir app or follow the steps below:
Snap open the lid of the water tub.
A
Fill it with drinking-quality water up to
B
the maximum water level mark.
Close the lid until it snaps shut.
C
Gently push the water tub into the
D
side of the machine until you feel it
lock into place.
*If your machine does not have a humidifier, please do not put water in the machine.
A & B
C
D
ResMed.com/RemoteSetUp
7
Advertisement
