Extremis AMAi HiLo Bench Manual page 14

Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
• Do not use any sharp tools to open the
packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the bench.
• Not grafitti proof.
• Do not leave children unattended whilst playing
on the bench.
• Colors can differ over years and from batch to batch.
Product
• Do not drag the bench, but carry it.
Powder coating
• White powder coating requires more
maintenance.
• Do not use abrasive scouring powders or
scourers as they will scratch the surface.
• Color can fade to some extent when exposed to UV.
• Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
• Dark colors can get very hot in sunny weather.
Sunbrella
• Not waterproof, store inside!
• Shake or brush off loose dirt immediately.
• UV color fasteness: 7/8 (ISO 105-B02).
ASSEMBLY INSTRUCTIONS
HiLo bench (short/long) - p8
1. Fix the backrest supports to the left & right leg
and fasten them with one M6x6 bolt and two flat
nylon washers each as shown in the drawing.
2. Now position the two legs at the ends of the
bench profiles and fasten them with two M8x35
bolts each.
3. Finally position the backrest between the
backrest supports and fasten it with four M8x25
bolts.
4. Simply change the position of the backrest for
high or low seating.
14
MAINTENANCE
Powder coating
CLEANING
Regularly
Use Extremis Multicleaner, a 100% biodegradable
detergent or common kitchen cleaning products.
Avoid using aggressive products. These surfaces are
best cleaned with a neutral cleaning product diluted
in water.
REPAIRING DAMAGED POWDER COATING
When damaged
The impact of sharp objects can damage the
coating. Scratches or dents can be touched up with
our paint pens. However this only camouflages the
scratches without removing them.
Sunbrella
SPILLED LIQUIDS
Immediately after use
It is best to treat spilt liquids immediately by placing
a sheet of absorbent kitchen paper on them. The
water-resistant coating on the Sunbrella prevents
droplets from penetrating the fabric.
REGULAR CLEANING
When dirty
Make a solution to remove stains on your Sunbrella.
MACHINE WASHING
Rarely
It is also possible to put the blankets and cushion
covers in a washing machine (30°). Do not dry clean
or tumble dry. The fabric can be creased. Ironing
will help to recover the waterrepellent coating of
the fabric, but only at a cool setting (delicates). As
some irons exceed the recommended temperature
at the synthetic setting, test a small, inconspicuous
area before ironing the entire fabric. DO NOT use a
steamer or iron set to the steam setting.
REMOVING STUBBORN STAINS
Only if nothing else helps
More drastic measures needed? Bleach can be used
if nothing else helps. Protect the area around your
Sunbrella fabric when using a bleach solution –
bleach may discolour non-Sunbrella fabrics.Please
be aware of the environment when cleaning with
bleach. Bleach can have harmful effects on the natu-
ral environment around you. We do not advise using
bleach if you are surrounded by a body of water or