User Authentication - Dell C7765dn Supplementary Manual

User Authentication

This section describes the operation of user authentication.
Before using all services and configuring settings, a user must be authenticated with
an ID and a passcode.
1
Press the <Log In/Out> button on the control panel.
2
Enter the "User ID" from keypad.
3
Select [Next] on the touch screen.
4
Enter the "Passcode" from keyboard.
5
Select [Enter] on the touch screen.
All features on the control panel will be available.
Important
Note
24
• When another user interrupts the machine in the interrupt mode, the user needs to logout
before canceling the interrupt mode.
Example:

User A is authenticated
 
User B logout cancel the interrupt mode
• When remote authentication is used, select "Registered User" or "System Administrator."
Thereafter, enter the User ID and the password.
• When using [Login to Local Accounts], only the System Administrator's ID is pre-registered
on the machine. Other user IDs are not registered. For details on how to register User IDs,
refer to "15 Tools" > "Authentication / Security Settings" > "Authentication" > "Create / View
User Accounts" in the User's Guide.
• When using [Login to Remote Accounts]. The User IDs are on a remote authentication
server. The System Administrator's ID on the machine is not registered on the remote
authentication server.

interrupt mode User B login

job complete