Advertisement
3
Pairing the Camera
1.
In Live View mode, click a channel that you want to pair the camera to.
2.
A Pair button appears. Press this button to commence pairing. A message will appear stating that you need
to press the pair button on the camera.
3.
Remove the cap covering the pair button. Press and hold the pair button for 3 seconds then release. The
camera will commence pairing and the camera's IR LEDs will start flashing.
4.
After a short moment the camera will be paired and you will see the camera's image on-screen. If the camera
fails to pair, repeat the above instructions and try again.
Off-line
Press the Pair button to
Channel 3
28/04/2021 01:14:41 PM
commence pairing.
Channel 2
28/04/2021 01:14:41 PM
Channel 4
28/04/2021 01:14:41 PM
Advertisement
