Summary of Contents for Swann AllSecure600 SWNVK-600SD2-EU
Page 1
Security Made Smarter Wi-Fi Battery-Powered Security Camera 2K HD for Wi-Fi NVRs Instruction Manual...
Page 2
Introduction Congratulations on the purchase of your Swann Wi-Fi Do not operate if wires and terminals are exposed. Battery-Powered Security Camera. Important Note: All jurisdictions have specific laws • 2K HD video transmitted wirelessly to NVR and regulations relating to the use of cameras. Be- fore using any camera for any purpose, it is the buy- •...
Charging the Battery Charge the battery with the included USB cable. Follow the illustration on the left for connection (power adapter not included). Charge the battery for about 30 mins, then disconnect. Insert the battery into the camera (it will click into place). After a short moment, you will hear a beep sound.
Pairing the Camera Channel 2 28/04/2021 01:14:41 PM Press the pair button to Channel 3 Channel 4 28/04/2021 01:14:41 PM 28/04/2021 01:14:41 PM commence pairing. In Live View mode, click a channel to pair the camera to. A pair button appears (a blue pair button may also appear in the top-right hand corner of each channel). Press this button to commence pairing.
Mounting the Camera The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must have sufficient strength to hold the camera. Unscrew the mounting plate anti-clockwise to remove it from the mounting bracket. Mounting Bracket Position the mounting plate in the location you want to mount it.
Page 6
Camera Location Tips Take into consideration what you want to monitor Think about the most likely way a potential offend- and where you’ll get the best view of it. er may approach your home, use your camera to give you the best coverage of these areas. How you’re going to connect the camera to your monitoring system;...