Setting The Time; Using The Timer - Casio 3523 Operation Manual

Setting the Time

The countdown start time can be set in 1-
second units up to 24 hours.
If a timer countdown operation is in
●
progress, reset the timer to its current start
time before performing this operation.

Using the Timer

l
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Press (A).
This causes the hours digits to flash.
Hours
3.
Use (B) to change the timer hour setting.
Holding down (B) scrolls through
●
settings at high speed.
4.
Press (C).
This causes the minutes digits to flash.
Minutes
5.
Use (B) to change the timer minute setting.
Watch Operation Guide 3523
6.
Press (C).
This causes the seconds digits to flash.
7.
Use (B) to change the timer seconds
setting.
8.
Press (D) to select Repeat Timer or Auto
Repeat Timer.
Each press of (D) toggles between
●
Repeat Timer and Auto Repeat Timer.
[AUTO] is displayed while Auto Repeat
●
is enabled.
9.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Setting a start time of [0:00 00] will
●
perform a countdown of 24 hours.
1.
Seconds
2.
3.
Using the Timer
Enter the Timer Mode.
Navigating Between Modes
l
Hour, minute, second
Use the operations below to perform a
timer operation.
B
Start
(Countdown starts)
B
Pause
B
Resume
(Time up)
A beeper will sound for 10 seconds to
●
let you know when the end of a
countdown is reached.
With Auto Repeat, the watch beeps
●
each second after the countdown
reaches 10 seconds.
To reset a paused countdown to the
●
start time, press (A).
Press any button to stop the tone.
Note
If flash alert is enabled, display
●
illumination flashes along with the
beeper at the end of the countdown.
Pressing any button to stop the alarm
beeper also stops the flash alert
operation.
Configuring Flash Alert Settings
l
10