Redback S0080 Operating Manual page 11

50 event 24 hour 7 day timer - din rail

Hide thumbs

page of 12

/ 12
Bookmarks

3.1.3 Edit the Clock Time

This option sets the current time.

After selecting the "Edit Time on Clock" option from the menu

shown in Fig 3.3 the LCD will display the screen shown in Fig 3.13

where the cursor flashes on the current day.

Pressing the up and down buttons will scroll through the days Mon-

day to Sunday. Pressing "Enter" will confirm the day and then move

the cursor to the hour option as shown in Fig 3.14.

Change the hour by pressing the +10, up and down buttons and

press "Enter" when finished. The cursor will now move to the

minute section of the clock time. Repeat the above procedure to

change the minutes and press "Enter" when finished. The cursor

will now move to the seconds section of the clock time. Repeat the

above procedure again to change the seconds and press "Enter"

when finished. The menu button can be pressed at any time to exit

the setup. The clock time is now set.

After completing the clock time, the screen will change to the

current time.

3.1.4 Clearing the Memory

This function will clear the internal memory, erasing any

information

entered.

The memory must be cleared before using

Navigate to the "Clear Memory of ON/OFF times" Sub Menu as

shown in Fig 3.3.

Press "Enter" to activate this option. If DIP switch 4 is set to "ON"

the screen will display the message shown in Fig 3.15.

Not Available

Check Settings

This is one of the security options to protect the information stored

in memory. See the DIP Switch settings for more

information. Set the DIP switch 4 to "OFF" and then press "Enter"

again. This time you should enter the Clearing the Memory Sub

Menu. The following two screens should be briefly displayed.

This will clear

all ON/OFF times

Then you will be asked to press "Enter" to confirm you want to clear the memory or press "Menu" to exit.

Hold ENTER for Y

or MENU for No

If you press Menu you will return to the Clear Memory Sub Menu.

If you press Enter, the unit will cycle through the memory locations clearing any data stored. This will take a few minutes.

Once finished you will return back to the Clear Memory Sub Menu.

NOTE: It is advisable to now set DIP switch 4 to "ON" to prevent accidental clearing of the memory.

IMPORTANT NOTE:

the unit for the first time.

Fig 3.15

Are you sure?

Sunday

00:00:00

Clock Day

Monday

Edit time

Enter

00:00:00

on clock

Tuesday

00:00:00

Wednesday

Press the UP and DOWN

00:00:00

buttons to change the

day.

Enter

Press the ENTER

button to make your

selection

Press the MENU

button to exit at any

Saturday

time.

00:00:00

Fig 3.13

Clock Time

+10

Press the +10 button to

change the

hour/min/secs.

Press the UP and DOWN

buttons to change the

hour/min/secs.

Enter

Press the ENTER

button to make your

selection

Press the MENU

button to exit at any

time.

Fig 3.14

Redback® Proudly Made In Australia 11

Edit

Monday