Advertisement
12
Fairbanks Nijhuis™
5430 Vertical Biltogether Dry-Pit Solids Handling Pumps
Installation, Operation and Maintenance
PARTS ORDERING
Ordering Parts
When ordering spare or replacement parts for the Figure B5430
pump, the figure number, size, item number and serial number
are required. Refer to the drawings and parts list in the back of
the manual to be sure of the correct name and item number.
Each part carries numbers and symbols that will be particularly
helpful in ensuring that you receive the correct replacement part.
Your order may be forwarded to your nearest Fairbanks Nijhuis™
distributor or directly to the factory.
Returning Parts
All materials or parts returned to the factory must have prior
approval and a Fairbanks Nijhuis™ "Returned Goods Tag" to
accompany them. Unnecessary delays and wasted efforts will
be avoided by using the proper procedure in returning parts
or equipment.
Contact your nearest Fairbanks Nijhuis™ distributor, listing the
material to be returned and the reasons for the return. He will
contact the factory to obtain approval for the return and to obtain
the necessary "Returned Goods Tag" if the return is approved.
You will be notified of the reasons if the approval is not given.
All material to be returned should be carefully packed to
avoid damage in route from rough handling or exposure to
weather. The "Returned Goods Tag" will give shipping
instructions. All material to be returned freight prepaid unless
otherwise instructed.
NOTE: WE RESERVE THE RIGHT TO CHANGE DESIGN AND
SPECIFICATIONS OF PRODUCTS AT ANY TIME.
AN INTERCHANGEABLE OR ADAPTABLE PART,
NOT IDENTICAL IN APPEARNACE, MAY BE
SUBSTITUTED IF THE PART ORDERED HAS BEEN
IMPROVED OR OTHERWISE MODIFIED.
08/14/13
Advertisement
