Table of Contents
Advertisement
VTSH
-SCR Vertical Turbine Solids Handling Screw Pumps
®
Installation, Operation and Maintenance
B.
Press the anti-rotation pin into the suction bell.
C. Lower the suction bell liner (98) into its machined seat aligning the anti-rotation pin hole on both parts.
D. Lower the diffuser bowl (30) onto the liner and suction bell to finish assembly.
To avoid distortion, ensure proper installation of the liner. The liner should be firmly butted between the
suction bell and diffuser bowl.
REPAIR PARTS:
Ordering parts:
When ordering parts, give pump serial number, size and model number and a complete description and item number
of each part. Refer to the drawing and parts list in the back of this manual.
You may order parts from your local Fairbanks Nijhuis distributor. Consult your local telephone yellow pages under
the heading - Pumps, for the office nearest you or visit FairbanksNijhuis.com to locate a distributor.
You may also order parts directly from the factory at the following address:
Fairbanks Nijhuis
3501 Fairbanks Avenue
Kansas City, KS 66106-0906
(913) 371-5000
FairbanksNijhuis.com
Recommended Spare Parts:
Refer to Table 11 for a list of recommended spare parts. This list is for
normal duty. Where severe conditions exist or minimum downtime is
critical, additional quantities and those items indicated should be
considered.
Predicted Life:
The predicted life of parts subject to wear, shown in Table 12, is based
on pumping liquid without abrasives, the pump operating at sold
conditions and that proper maintenance is performed.
The actual life encountered for the specific parts may vary significantly as
a result of the content of liquid pumped, maintenance performed, actual
operating conditions and other factors.
These predicted life figures are best engineering judgments and are not
to be construed as an extension of warranty.
5/30/2016
CAUTION:
Table 11: Recommended Spare Parts
Ref.
Description
No.
13
Top Shaft Sleeve
15
Packing, Set
41
Bowl Throttle Ring
50
Bearing, Connector, Set
98
Bell Liner
163
Lower Bearing
168
Upper Bearing
28A
Head Gasket
63A
Seal Box Gasket
Fairbanks Nijhuis™
29
Quantity
1
1
1
1
1
1
1
1
1
Advertisement
Table of Contents
