(roller blinds, boat blinds, Roman blinds, Venetian blinds and projection screens), excluding pantographs. The Sonesse 50 drive is designed to drive multi-banding roller blinds. The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are intercon- nected by a drive bracket.
Somfy and the regulations applicable in the country in which it is commissioned. It is prohibited to use the Sonesse 50 drive outside the fields of application described above. Such use, and any failure to comply with the instructions given in this guide and in the attached Safety instructions document, absolves Somfy of any liability and invalidates the warranty.
Attach cables to prevent any contact with moving parts. The cable on the Sonesse 50 can be removed. If it is damaged, replace it with an identical cable. Leave the motorisation power supply cable accessible: it must be possible to replace it easily.
Christian REY, Approval manager, acting on behalf of Activity director, Cluses, 07/2022. Somfy limited, Yeadon LS19 7ZA UK hereby declares that the drive covered by these instructions when marked for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with UK legislation of Machinery safety regulations S.I.2008 N°1597.