Table of Contents
Advertisement
N9010/20/30AK-REA
Description
The Agilent N9010/20/30AK Option REA provides the capability to relocate the
instrument disk drive from the internal drive drawer, to an external customer supplied
enclosure. This is accomplished by installing an eSATA drive adapter into the CPU rear
panel slot, normally occupied by the internal disk drive. An eSATA cable (also customer
supplied) connects the eSATA adapter to the external drive enclosure. The purpose is to
allow easier access to the drive, especially rack mounted instruments or secure locations.
The CPU in the N9010A and N9020A instrument must be equipped with a removable disk
drive. Early N9010A or N9020A instruments without removable disk drives will require
installation of Option AK-PC2 (CPU with removable drive). All N9030A instruments have
removable disk drives.
For additional information, please go to: http://www.agilent.com/find/security
For further information refer to Agilent X Series Signal Analyzers, Option
IMPORTANT
SSD Solid State Disk Drive Installation Note (N9030-90009).
Description
Products Affected:
Serial Numbers:
To Be Performed By:
Estimated Installation Time:
Estimated Adjustment and Verification Time:
2
Item
N9010/20/30A with removable HDD or SSD
drive
N9010A with Option PC2
( ) Agilent Service Center
( ) Personnel Qualified by Agilent
(X) Customer
2.0 Hours
0 Hours
Description
N9030-90019
Advertisement
Table of Contents
