Update The Dstream-St Firmware - ARM DSTREAM-ST Getting Started Manual

DSTREAM-ST Getting Started Guide
2. The FLASH LED flashes as the flash memory is accessed.
3. The STATUS LED flashes green and then stays illuminated.
4. If the target is connected to the DSTREAM-ST unit and powered, the TARGET LED illuminates
green.
The DSTREAM-ST unit is now ready for use.
3.5 Update the DSTREAM-ST firmware
The DSTREAM-ST system firmware provided with Arm
DSTREAM-ST operating system, templates that define how the debug hardware communicates
with target devices, and configuration files for add-on probes (such as the Parallel Trace probe).
Before you begin
• You must ensure that Arm Development Studio is installed on the host PC.
In Arm Development Studio, the latest firmware files are available at:
<Arm_Development_Studio_install_directory>/sw/debughw/firmware/
• You must also ensure that the current DSTREAM-ST firmware is at least the minimum version
required by Arm Development Studio.
Procedure
1. Open the Debug Hardware Firmware Installer view
Studio, select Window > Show View > Debug Hardware Firmware Installer.
2. For the Debug Hardware field, click Browse... and Select your debug unit, then click Connect.
Result: You can view the currently installed firmware version, the auto-selected new firmware
file, and the new firmware details.
3. Accept the auto-selected firmware update file, or browse and select a different firmware update
file. Either:
• To accept the auto-selected firmware update file, click Install.
• To select a different firmware update file, in Select Firmware Update File, click Browse,
select your firmware update file, and click Open. Click Install.
Results
The firmware is now updated on the DSTREAM-ST unit.
Related information
Connect and power up the DSTREAM-ST unit
Copyright © 2017–2019, 2022 Arm Limited (or its affiliates). All rights reserved.
® Development Studio contains the
from the main menu in Arm Development
on page 20
Non-Confidential
Document ID: 100892_1.0_07_en
Version 1.0
Set up your DSTREAM-ST
.
Page 23 of 31