EasyLog EL-USB-1 PRO Quick Start Manual page 3

REPLACING YOUR DATA LOGGER'S BATTERY
II!••
is prO\/lde<t with a 3,6V 1/2AA battery already Installed, You
W,e battery by foUo' M nC the instructions below.
.,,
1
/
/ ...
3
EL-USEHPRO
Before using the data logger you will need to insert the 3.6V 2/3AA High
Temperature battery provided, following the Instructions below.
2
EL-USB-1.flCG
The EL-l.lSS.1·RCG's batteiy is preinstalled. To charge the battery, connect
to a USB pott untll the green LEO shows. The rechargeable battery shoukl
4
ont, be rePlaced by an authorized suppfier.