Advertisement
INSTRUCTION-OPERATING OF FUNCTIONS FOR CLICK CLACK SOFA
Click Clack has a 3 stage mechanism which uses a ratchets system.
First position is flat for use as a bed.
Second position is Lounger when back is mid way up in locked position.
Third position is as a Sofa full upright locked position.
Please follow instruction below to achieve desired position
Starting from flat position to move to Lounger position. With a person on each side of
sofa, in unison lift backrest up till you hear a click noise, this should then hold mid way
lock.
To go from Lounger position to Sofa position. With a person on each side of sofa, in
unison lift backrest till you hear another click, again this should then hold at upright
position.
To go back to flat or Bed position, you will need to release locking mechanism. This done
by lifting and pushing backrest forward till you here clack. Once you here the clack lower
backrest till flat.
Note/Warning: The ratchet mechanism is designed only to work one way you can only
lock the 2 upright positions from flat starting. So can not go from Sofa position to
Lounger
position must always go back to flat position.
If for some reason you do not get a lock position when raising from flat position. Lift
backrest all the way to the clack release point then back again, sometimes doing it twice
has better success.
Advertisement
