Advertisement
Before starting assembly please ensure sofa body is in bed position.
To adjust backrest if in locked position see operating page further on
in manual.
ASSEMBLY STEP 1– FIT BACK LEGS
With sofa body [F] in upside down flat position. Locate holes in base of sofa body
would be 2 holes closest to the centre or folding section of sofa body as indicated in
diagram below.
Take back leg [E] place as indicated in diagram aline holes in leg with thread hole in
sofa body. Take bolt [A] together with washer [B] insert thru hole then by hand seat
bolt properly into thread turn 2-3 times till you can not remove bolt without undoing.
Do not tighten yet insert second bolt with washer in second hole repeat as above.
Once both bolts are seated correctly then take tool [C] and tighten bolts. Do not over
tighten. Repeat for other back leg. Go to Step 2.
ASSEMBLY STEP 2—FIT FRONT LEG
As indicated in diagram below take front leg [D] insert into threaded hole in sofa body,
seat thread properly turn 2-3 times ensure it is seated properly then by hand tighten
till firm. Do not over tighten. With the help of another person lift from sides of sofa
rotate with legs going down first till you can place on feet. Note backrest can move
when
lifting incorrectly. Go to next page
Advertisement
