Raider RD-PSH02 User Manual page 13

3. Battery charge indicator
You should charge the battery immediately if you see that only the red LED is lit. Your battery is
charged when the LED is green
• Lithium-ion batteries are protected against complete discharge. Your cordless pruning shears
will turn off as soon as the battery runs out.
• NOTE: Release the trigger switch or risk damaging the battery
4 Charge the battery
You must charge the battery before using your cordless pruning shears for the first time.
• Use only the charger that comes with the cordless pruning shears.
• Use the charger only in dry indoor areas.
• Charge the battery only in ambient temperatures of 10 °- 40 ° C.
• Plug the charger into a 230V AC mains supply, and insert the battery into the charger jack.
• The handle may become hot during the charging process. This is normal.
• Unplug your cordless pruning shears if you do not intend to use it for an extended period of
time.
• Do not turn on the cordless pruning shears during the charging process.
5. Start the cordless shears.
You must charge the battery before using your cordless pruning shears for the first time.
• Use only the charger that comes with the cordless pruning shears.
• Use the charger only in dry indoor areas.
• Plug the charger into a 230V AC mains supply, and insert the battery into the charger jack. The
battery is charged after all the charger LEDs turn green.
• Do not turn on the cordless pruning shears during the charging process.
• To switch on your pruner, first press the on / off button (5), then press the trigger lever (2) twice.
Press and hold the start switch lever (2) to stop the machine. To turn off the machine completely,
press the on / off button. (5)
6. Maintenance and Storage
6.1. When not in use store the machine within reach of children;
6.2. Always clean the remnants of grass and shrubs on the cutting head using a brush.
6.3. Apply spray support of the cutting head, in order to prevent rust.
6.4. Insert the appropriate fuse cutting head before storing for a longer period of time.
When you need to perform activities near the knife, work always with protective gloves!
Perform maintenance procedures regularly to ensure your long-term and reliable use of pruning
shears. Check periodically for visible defects such as loose or damaged blade and loosened screw
connections. Make sure that the covers and safety equipment are in working and installed correctly.
To clean the instrument, use only mild soap and a damp cloth to clean the instrument. Do not
immerse the instrument in water and wash it with a hose. Do not allow any liquid to enter inside it.
Do not clean with high pressure cleaner.
7. Practical tips:
7.1. Observe local regulations for the time of day during which you can use the machine outdoors.
In some countries it is prohibited cutting the morning before 08.00 hours, in the afternoon between
2:00 p.m. to 16:00 hours and in the evening after 22.00 hours, to protect citizens from unwanted
noise.
7.2. When working ruggedized careful not to overload the motor. Overload rotation speed of the
motor falls and the sound thereof is changed. In this case, stop, release the lever for inclusion (4)
and adjust the cutting speed. Otherwise performance will be reduced and the machine could be
damaged.
7.3. When cutting close to the edges careful not to pinch pruning shears with foreign objects.
7.4. The productivity of cutting depends on the thickness, moisture content, length of the
branches, and the speed of cutting. Cutting performance decreases with frequent switching of
pruning shears. To optimize the performance of cutting is recommended more frequent cutting,
13