Advertisement
3.2.3
Normal DVD player signal output setting:
DVD player play landscape or dramatis personae testing disc, Connecting
AV、S-VIDEO cable . Keep playing so that it could get better picture and
accompanying sound.
3.2.4
HD DVD player signal output setting:
DVD player play landscape or dramatis personae testing disc, Connecting
HDMI cable . Keep playing so that it could get better picture and
accompanying sound.
3.2.5
PC setting:
Setting at 1024*768/ 60Hz, Opening NOKIA testing figure and playing MP3
output audio.
3.2.6
TV is setting at SCART source.
3.2.7
Cleaning testing desk and wearing gloves , Attention to ESD safe.
3.3 Adjustment & Testing Step:
3.3.1
Switch on the TV.
AV 、S-VIDEO testing:
3.3.2
Press INPUT button to enter AV mode, then "AV" symbol will display on the
up-right corner of the screen.
3.3.2.1
Then Press DISPLAY, RED, GREEN, YELLOW, DISPLAY these 5 buttons sequentially
to enter the factory default setting page 2 (refer picture 1). Please check the item "DISC",
the setting parameter of "DISC" usually should be 127+/-1. If the "DISC" parameter is
far away from 127+/-1, please use the
to adjust it into the factory default setting page 2.
Notice: The above adjustment must be operated when the AV signal is available. If
no signal, cannot adjust the parameters.
Picture 1 (factory Setting Page 2)
"
" "
"
▲
▼
button to select next item "AUTO"
Picture2 (Factory Setting Page 1)
Advertisement
