Panasonic KX-FHD332C Service Manual page 71

Test Mode Type of
DTMF SINGLE Service
TEST
KEY CHECK Service
MEMORY Service
CLEAR
LED CHECK Service
PRINT TEST Service
PATTERN
Code
Mode
Operation after
code input
"5" "5" "2"
Mode
1....ON
2....OFF
"5" "6" "1"
Mode
START (any
key)
"5" "5" "0"
Mode
START
"5" "5" "7"
Mode
START
"8" "5" "2"
Mode
START
Outputs the DTMF as single tones. Used to check
frequencies of the individual DTMF tones. Refer to
SINGLE TONE TRANSMIT SELECTION
Checks the button operation.
Indicates the button code on the LCD while the button
pressed. Refer to BUTTON CODE TABLE
To reset the value to the default one, except the top
(#853), time/day (#001), logo (#002), Fax ID, History,
Directory.
Please restart a power supply after clearing a memory.
All LEDs above the operation panel board flash on
or are illuminated.
Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See
71
Function
().
().
PRINT TEST PATTERN ()