Table of Contents
Advertisement
Remote Sensor
The PROV1022 / PROV1022 S / PROV1022 P incorporates two
Infrared sensors which relay signals from the remote control to allow
the unit to be controlled simply by pointing its remote control at the
remote sensor eye. The repeater function allows control of auxiliary
equipment such as an Audiovox Video Cassette Player. The infrared
sensor can relay signals from most manufacturer's remote controls
to its respective component connected to the AV1 input. In this
case you must use the remote control supplied with the component.
Accessories
Wireless Headphones
The PROV1022 / PROV1022 S / PROV1022 P includes a built-in infrared transmitter for use with Audiovox wireless
headphones (P/N IR2CHS). The volume can then be adjusted using the controls on each headset. The wireless
headphones must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel
only in a straight line. See the documentation accompanying your Audiovox wireless headphones.
IR2 Input
Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio program
connected to the IR2 input can be received on the B channel of the dual channel wireless headphones (P/N IR2CHS).
Headset Special Features
•
Automatic Level Control prevents input signal over loading.
•
Uses high frequency infrared light to assure a clean signal for clear reception.
R e m ote
S e n so r
E ye
-
-
17
R e m ote
S e n so r
E ye
128-7178
17 of 30
Advertisement
Table of Contents
